Intel® Server Board M10JNP2SB Firmware Update Package

19519
10/5/2020

Introduction

As of 17 February 2024, no functional, security, or other updates will be provided for Intel® Server Board M10JNP Family BIOS and Firmware Update Packages. Intel® Server Board M10JNP Family BIOS and Firmware Update Packages will no longer be available after 29 March 2024. All versions are provided as is. Intel recommends that users of Intel® Server Board M10JNP Family BIOS and Firmware discontinue use as soon as possible. Provides the Intel® Server Board M10JNP2SB Firmware Update Package.

Available Downloads

  • OS Independent
  • Size: 64.6 MB
  • SHA1: B771BC87C2EC7B8FA20EEB2A2CA32F6F4C2FC871

Detailed Description

This update package includes the following production level firmware updates:

  • Board BIOS - 7.214
  • BMC Firmware - 8100.01.07.01

Firmware update tools

  • Yafuflash*
  • SocFlash* utility

Supported products

Intel® Server Board M10JNP2SB

Important Notes


IMPORTANT: Intel has found that when performing an update of the Baseboard Management Controller (BMC) FW using the in-band method (directly from the OS), the update process may hang and fail when updating from FW versions 1.03 and earlier. BMC FW versions 1.06 and later do not present this issue anymore and the BMC FW update in-band method can be used normally. More information please review TA-1157 at intel.com.

IMPORTANT: BMC Flash is only working through FW Update on BMC Web Console method. Please follow instructions of section BMC installation with BMC Web Console.

WARNING: It is very important to follow these instructions as they are written. Failure to update using the proper procedure may cause damage to your system.

Advisory note

Do not modify any of the script files. The scripts as written will provide the most reliable update experience.


To run these updates, you must boot the system to the embedded uEFI shell.

Hardware and firmware requirements


To update the firmware stack to the versions included in this update package, the currently loaded firmware stack on the system must meet the following:

  • BIOS with ME update V7.2xx

Important: to ensure a proper system update, install BIOS updates first, and then install BMC updates.

This download is valid for the product(s) listed below.