Cyclone® V FPGAs provide the industry's lowest system cost and power, along with performance levels that make the device family ideal for differentiating your high-volume applications. You'll get up to 40 percent lower total power compared with the previous generation, efficient logic integration capabilities, integrated transceiver variants, and SoC FPGA variants with an ARM*-based hard processor system (HPS).
Purchase the Cyclone® V GX Starter Kit for only $179.
Family Variants
Cyclone® V FPGA E
Optimized for lowest system cost and power for a wide spectrum of general logic and DSP applications
Cyclone® V FPGA GX
Optimized for lowest cost and power for 614 Mbps to 3.125 Gbps transceiver applications
Cyclone® V FPGA GT
FPGA industry’s lowest cost and power for 6.144 Gbps transceiver applications
Cyclone® V FPGA SE
Integrated ARM Cortex*-A9 MPCore* Processor System optimized for lowest system cost and power for a wide spectrum of general logic and DSP applications
Cyclone® V FPGA SX
Integrated ARM Cortex*-A9 MPCore* Processor System optimized for lowest cost and power for 614 Mbps to 3.125 Gbps transceiver applications.
Cyclone® V FPGA ST
Integrated ARM Cortex*-A9 MPCore* Processor System - FPGA industry’s lowest cost and power for 6.144 Gbps transceiver applications
Benefits
Tailored for High-Volume, Cost-Sensitive Applications
With Cyclone® V FPGAs, you can get the power, cost, and performance levels you need for high-volume applications including protocol bridging, motor control drives, broadcast video converter and capture cards, and handheld devices. Learn more about the advantages of Cyclone® V FPGAs in a variety of market segments.
SoC FPGAs – Your Customizable ARM Processor-Based SoC
SoC FPGAs let you reduce system power, system cost, and board space by integrating a HPS – consisting of processors, peripherals, and memory controller – with the FPGA fabric using a high-bandwidth interconnect backbone. The combination of the HPS with Intel's 28 nm low-power FPGA fabric provide the performance and ecosystem of an applications-class ARM processor with the flexibility, low cost, and low power consumption of the Cyclone® V FPGAs. Learn more.
Reducing Total System Cost Through Integration
Because Cyclone® V FPGAs integrate an abundance of hard intellectual property (IP) blocks, you can differentiate and do more with less overall system cost, power, and design time. Key hard IP blocks include the following:
- Hard memory controllers supporting 400 MHz DDR3 SDRAM with optional error correction code (ECC) support
- PCI Express* (PCIe*) Gen2 with multifunction support
- Variable-precision digital signal processing (DSP) blocks
- HPS Dual-core ARM Cortex-A9 MPCore processor
Industry-Leading Low Power and Low System Cost
- Up to 40 percent lower total power compared with Cyclone IV GX FPGAs
- Lowest power serial transceivers with 88 mW maximum power consumption per channel at 5 Gbps
- Over 4,000 MIPS (Dhrystones 2.1 benchmark) processing performance for under 1.8 W (for SoC FPGA)
- Lower power due to increased use of hard IP blocks
Also lowering cost – the FPGAs require only two power regulator voltages and come in wire-bond packages with small form factor options.
Features
Architecture
With over 30 global clock trees and a power-optimized version of Intel's high-performance MultiTrack routing architecture.
Memory
The multiport memory controller hard intellectual property (IP) block brings a new level of productivity and time-to-market advantage.
Tranceivers
The Cyclone® V FPGA family has a flexibility that helps you fully utilize all available transceiver resources and keep designs in a smaller and lower cost device.
Design Tools
Intel® Quartus® Prime Software
FPGA RTL Developers. Start Coding, Floor Planning, and Estimating Power with Cyclone® V Devices Today!
System Board Designers
Get Started on Your Board Today.
Embedded Software Engineers
Get Started on Your Software Today with the Cyclone® V SoC Development Kit.
Configuration Center
Learn about the Cyclone® V FPGA configuration solution that best fits your requirements.
Reference Designs
Multiple design examples and reference designs are available for Cyclone® V FPGA kits.
For a list of all Cyclone® V FPGA designs, visit the Design Store.
Development Kits and Boards
Intel provides several development kits that feature Cyclone® FPGAs and SoCs. These kits provide a complete design environment that includes all the hardware and software that you need to develop full FPGA designs and test them within a system environment.
Applications
Cyclone® V FPGAs provide the industry’s lowest system cost, lowest power FPGA solution as well as small form-factor package options (as small as 11x11 mm2). These advantages, along with its performance and logic utilization, result in devices optimized for differentiating your high-volume applications. The abundance of hard intellectual property (IP) blocks in the core FPGA fabric, such as variable precision digital signal processing (DSP) blocks, multiport memory controllers, and PCI Express* Gen2 hardened IP with multifunction enable you to do more with less overall system cost and design time. As ready-to-use functions, these hard IP blocks will ease your development process and consume less power, and in the case of hardened memory controllers, less board space vs. soft logic. They’ll also free up more logic resources that you can devote to unique features that will differentiate your products.
Documentation and Support
Find technical documentation, videos, and training courses for your Intel® Cyclone® V FPGA designs.
Related links
Samples and Ordering
Learn more about how to buy Intel programmable solutions, explore available development kits, and more.
Development Kits
Get information about hardware solutions and tools offered by Intel to accelerate the design process.
Ordering Codes
Decipher Intel® FPGA part numbers, including the significance of certain prefixes and package codes.
Where to Buy
Contact an Intel® Authorized Distributor today.