Which Macronix flash devices are supported by Intel® Arria® 10 and the Intel Cyclone® 10 GX devices in the Intel Quartus® Prime software version 18.1?

The Active Serial (AS) configuration control block in Intel® Arria® 10 and Intel Cyclone® 10 GX is fixed to 10 dummy clock cycles and 4 byte addressing, therefore only certain Macronix flash devices are supported for these FPGAs in Intel Quartus® Prime software version 18.1.

To work around this problem,  the following Macronix* flash devices can be used in Active Serial (x1 and x4) configuration mode:

Refer to the list below for Macronix flash devices supported by Intel Arria 10 and the Intel Cyclone 10 GX devices in Intel Quartus® Prime software version 18.1.