Stratix® 10 10GBASE-KR PHY IP Core User Guide

ID 683500
Date 5/03/2024
Public
Document Table of Contents

7.1.6. Compiling and Configuring the Design Example in Hardware

To compile the hardware design example and configure it on your Stratix® 10 device, follow these steps:
  1. Ensure hardware design example generation is complete.
  2. In the Quartus® Prime Pro Edition software, open the Quartus® Prime project <design_example_dir>/hardware_test_design/de_wrapper.qpf.
  3. On the Processing menu, click Start Compilation.
  4. After you generate a SRAM object file (.sof), follow these steps to program the hardware design example on the Stratix® 10 device:
    1. On the Tools menu, click Programmer.
    2. In the Programmer, click Hardware Setup.
    3. Select a programming device.
    4. Select and add the Stratix® 10 Transceiver Signal Integrity Development Kit to your Quartus® Prime session.
    5. Ensure that Mode is set to JTAG.
    6. Select the Stratix® 10 device and click Add Device. The Programmer displays a block diagram of the connections between the devices on your board.
    7. In the row with your .sof, check the box for the .sof.
    8. Check the box in Program/Configure column.
    9. Click Start.