Stratix® 10 Configuration User Guide

ID 683762
Date 4/05/2024
Public
Document Table of Contents

7.3. Understanding Configuration Status Using quartus_pgm command

You can read the device configuration status from the command line directly. In the following command, specify the cable index and the JTAG chain device index to obtain the configuration status.
quartus_pgm -c <cable index> -m jtag -device=<device order in jtag chain> -status
The following example output shows the device status with cable index set to 1 and the second device selected as the targeted device in the JTAG chain after a successful configuration.
quartus_pgm -c 1 -m jtag -device=2 -status
Info (21597): Response of CONFIG_STATUS    
   Device is running in user mode
   00006000  RESPONSE_CODE=OK, LENGTH=6
   00000000  STATE=IDLE
   00000000  Version
   C000000F  MSEL=JTAG, nSTATUS=1, nCONFIG=1
   00000003  CONF_DONE=1, INIT_DONE=1, CVP_DONE=0, SEU_ERROR=0
   00000000  Error location
   00000000  Error details