R-tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

ID 683501
Date 6/20/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3.9. Hard IP Status Interface

This interface includes the signals that are useful for debugging, such as the link status signal, LTSSM state outputs, etc.

Table 70.  Hard IP Status Interface Signals
Signal Name Direction Description EP/RP/BP Clock Domain
pX_link_up_o Output When asserted, this signal indicates the link is up. EP/RP/BP coreclkout_hip
pX_dl_up_o Output When asserted, this signal indicates the Data Link (DL) Layer is active. EP/RP/BP coreclkout_hip
pX_ltssm_state_delay_o[5:0] Output

Delayed version of the live LTSSM state of the PCIe Hard IP.

  • 6'h00: S_DETECT_QUIET
  • 6'h01: S_DETECT_ACT
  • 6'h02: S_POLL_ACTIVE
  • 6'h03: S_POLL_COMPLIANCE
  • 6'h04: S_POLL_CONFIG
  • 6'h05: S_PRE_DETECT_QUIET
  • 6'h06: S_DETECT_WAIT
  • 6'h07: S_CFG_LINKWD_START
  • 6'h08: S_CFG_LINKWD_ACCEPT
  • 6'h09: S_CFG_LANENUM_WAIT
  • 6'h0A: S_CFG_LANENUM_ACCEPT
  • 6'h0B: S_CFG_COMPLETE
  • 6'h0C: S_CFG_IDLE
  • 6'h0D: S_RCVRY_LOCK
  • 6'h0E: S_RCVRY_SPEED
  • 6'h0F: S_RCVRY_RCVRCFG
  • 6'h10: S_RCVRY_IDLE
  • 6'h11: S_L0
  • 6'h12: S_L0S
  • 6'h13: S_L123_SEND_EIDLE
  • 6'h14: S_L1_IDLE
  • 6'h15: S_L2_IDLE
  • 6'h16: S_L2_WAKE
  • 6'h17: S_DISABLED_ENTRY
  • 6'h18: S_DISABLED_IDLE
  • 6'h19: S_DISABLED
  • 6'h1A: S_LPBK_ENTRY
  • 6'h1B: S_LPBK_ACTIVE
  • 6'h1C: S_LPBK_EXIT
  • 6'h1D: S_LPBK_EXIT_TIMEOUT
  • 6'h1E: S_HOT_RESET_ENTRY
  • 6'h1F: S_HOT_RESET
  • 6'h20: S_RCVRY_EQ0
  • 6'h21: S_RCVRY_EQ1
  • 6'h22: S_RCVRY_EQ2
  • 6'h23: S_RCVRY_EQ3
EP/RP/BP slow_clk
pX_ltssm_st_hipfifo_ovrflw_o Output PCIe Hard IP FIFO storing ltssm_state changes is full. State changes may have been dropped prior to the current ltssm_state value change. EP/RP/BP slow_clk
pX_surprise_down_err_o Output Surprise Down Error indicator. EP/RP/BP coreclkout_hip
pX_dl_timer_update_o Output This signal asserts when DL Ack/Replay Timers need to be updated due to a change in the Maximum Payload Size, Link Width, or Link Speed. EP/RP/BP coreclkout_hip
pX_tx_ehp_deallocate_empty_o Output This signal indicates when the PCIe Hard IP Tx FIFO is empty. EP/RP/BP coreclkout_hip