Intel® Stratix® 10 Embedded Memory User Guide

ID 683423
Date 10/01/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3.6. FIFO Output Status Flag and Latency

The main concern in most FIFO design is the output latency of the read and write status signals.
Table 41.  Output Latency of the Status Flags for SCFIFOThis table shows the output latency of the write signal (wrreq) and read signal (rdreq) for the SCFIFO according to the different output modes and optimization options.
Output Mode Optimization Option 26 Output Latency (in number of clock cycles)
Normal 27 Speed wrreq / rdreq to full: 1
wrreq to empty: 2
rdreq to empty: 1
wrreq / rdreq to usedw[]: 1
rdreq to q[]: 1
Area wrreq / rdreq to full: 1
wrreq / rdreq to empty : 1
wrreq / rdreq to usedw[] : 1
rdreq to q[]: 1
Show-ahead 27 Speed wrreq / rdreq to full: 1
wrreq to empty: 3
rdreq to empty: 1
wrreq / rdreq to usedw[]: 1
wrreq to q[]: 3
rdreq to q[]: 1
Area wrreq / rdreq to full: 1
wrreq to empty: 2
rdreq to empty: 1
wrreq / rdreq to usedw[]: 1
wrreq to q[]: 2
rdreq to q[]: 1
Table 42.  ALM Implemented RAM Mode for SCFIFO and DCFIFO
Output Mode Optimization Option 28 Output Latency (in number of clock cycles)
Normal 29 Speed wrreq / rdreq to full: 1
wrreq to empty: 1
rdreq to empty: 1
wrreq / rdreq to usedw[]: 1
rdreq to q[]: 1
Area wrreq / rdreq to full: 1
wrreq / rdreq to empty : 1
wrreq / rdreq to usedw[] : 1
rdreq to q[]: 1
Show-ahead 29 Speed wrreq / rdreq to full: 1
wrreq to empty: 1
rdreq to empty: 1
wrreq / rdreq to usedw[]: 1
wrreq to q[]: 1
rdreq to q[]: 1
Area wrreq / rdreq to full: 1
wrreq to empty: 1
rdreq to empty: 1
wrreq / rdreq to usedw[]: 1
wrreq to q[]: 1
rdreq to q[]: 1
Table 43.  Output Latency of the Status Flag for the DCFIFO This table shows the output latency of the write signal (wrreq) and read signal (rdreq) for the DCFIFO.
Output Latency (in number of clock cycles)
wrreq to wrfull: 1 wrclk
wrreq to rdfull: 2 wrclk cycles + following n rdclk 30
wrreq to wrempty: 1 wrclk
wrreq to rdempty: 2 wrclk 31 + following n rdclk 31
wrreq to wrusedw[]: 2 wrclk
wrreq to rdusedw[]: 2 wrclk + following n + 1 rdclk 31
wrreq to q[]: 1 wrclk + following 1 rdclk 31
rdreq to rdempty: 1 rdclk
rdreq to wrempty: 1 rdclk + following n wrclk 31
rdreq to rfull: 1 rdclk
rdreq to wrfull: 1 rdclk + following n wrclk 31
rdreq to rdusedw[]: 2 rdclk
rdreq to wrusedw[]: 1 rdclk + following n + 1 wrclk 31
rdreq to q[]: 1 rdclk
26 Speed optimization is equivalent to setting the ADD_RAM_OUTPUT_REGISTER parameter to ON. Setting the parameter to OFF is equivalent to area optimization.
27 Normal output mode is equivalent to setting the LPM_SHOWAHEAD parameter to OFF. For Show-ahead mode, the parameter is set to ON.
28 Speed optimization is equivalent to setting the ADD_RAM_OUTPUT_REGISTER parameter to ON. Setting the parameter to OFF is equivalent to area optimization.
29 Normal output mode is equivalent to setting the LPM_SHOWAHEAD parameter to OFF. For Show-ahead mode, the parameter is set to ON.
30 The number of n cycles for rdclk and wrclk is equivalent to the number of synchronization stages and are related to the WRSYNC_DELAYPIPE and RDSYNC_DELAYPIPE parameters. For more information about how the actual synchronization stage (n) is related to the parameters set for different target device, refer to FIFO Metastability Protection and Related Options .
31 This is applied only to Show-ahead output modes. Show-ahead output mode is equivalent to setting the LPM_SHOWAHEAD parameter to ON.